Información del personal investigador

Advances in condition monitoring of machinery in non-stationary operations: Proceedings of the 6th International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO 2018, 20-22 June 2018, Santander, Spain

Autoría: AYOUB MBAREK, AHMED HAMMAMI, ALFONSO FERNANDEZ DEL RINCON, FAKHER CHAARI, MIGUEL IGLESIAS SANTAMARIA, FERNANDO VIADERO RUEDA, MOHAMED HADDAR

2019

Influence of the phase in planetary gears load sharing and transmission error

Comunicación a Congreso

Advances in mechanism and machine science: Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science, Krakow, Poland, from June 30 to July 4, 2019

Autoría: JAVIER SANCHEZ ESPIGA, ALFONSO FERNANDEZ DEL RINCON, MIGUEL IGLESIAS SANTAMARIA, FERNANDO VIADERO RUEDA

2019

Comparison of experimental and operational modal analysis on a back to back planetary gear

Artículo de Revista

Mechanism and Machine Theory, 2018, 124, 226-247

Autoría: AYOUB MBAREK, ALFONSO FERNANDEZ DEL RINCON, AHMED HAMMAMI, MIGUEL IGLESIAS SANTAMARIA, FAKHER CHAARI, FERNANDO VIADERO RUEDA, MOHAMED HADDAR

01/06/2018

77 resultados

1 de 4

Volver

Estamos realizando la búsqueda. Por favor, espere...

Researchers portal

Portal del personal investigador

MIGUEL IGLESIAS SANTAMARIA

Identificadores

Influence of eccentricity error on the orbit of a two-stage double-helical compound planetary gear train with different mesh phasing configurations

Torsional vibration modelling of a two-stage closed differential planetary gear train

Use of sun gear orbits to obtain the load sharing in planetary transmissions and its impact in the tooth load

Probabilistic analysis of the mesh load factor in wind-turbine planetary transmissions: tooth thickness errors

Influencia de los errores de fabricación en el comportamiento de un tren de engranajes planetarios de dos etapas

Efecto de los errores variables en el tiempo en transmisiones planetarias de dientes rectos con diferencias en la fase de engrane

Influencia de la fase de engrane y los errores variables en el tiempo en la respuesta dinámica de una transmisión planetaria

Estudio estadístico de la influencia de los errores inherentes de fabricación en el Mesh Load Factor de transmisiones planetarias

Medida del reparto de carga en transmisiones planetarias

Flipped classroom and technology enhanced learning in mechanical engineering

Statistical study of the mesh load factor of planetary gear transmissions affected by inherent manufacturing errors: application of the Method of Monte Carlo to the gear manufacturing process in planetary gears with pinhole position and tooth thickness errors

Torres Quevedo's mechanical calculator for second-degree equations with complex coefficients

Numerical evaluation of the accuracy in the load sharing calculation using strain gauges: sun and ring gear tooth root

Planetary gear transmissions load sharing measurement from tooth root strains: numerical evaluation of mesh phasing influence

Impacto en la respuesta a los errores de fabricación de transmisiones planetarias con diferentes fases de engrane

Análisis de la relevancia del K(gamma) como parámetro indicativo del reparto de carga en transmisiones planetarias en fase y desfasadas

Efectos de la fase de engrane sobre el reparto de carga y el error de transmisión

Monitoring of misalignment in low speed geared shafts with acoustic emission sensors

Influence of errors in planetary transmissions load sharing under different mesh phasing

Impact of position and tooth thickness errors on planetary transmission under different meshing phase

Gear rattle dynamics: lubricant force formulation analysis on stationary conditions

Influence of the non-linear hertzian stiffness on the dynamic behavior of planetary gear during run up condition

Influence of the phase in planetary gears load sharing and transmission error

Comparison of experimental and operational modal analysis on a back to back planetary gear