Estamos realizando la búsqueda. Por favor, espere...


Using mixture design of experiments to assess the environmental impact of clay-based structural ceramics containing foundry wastes

Abstract: This work describes the leaching behavior of potentially hazardous metals from three different clay-based industrial ceramic products (wall bricks, roof tiles, and face bricks) containing foundry sand dust and Waelz slag as alternative raw materials. For each product, ten mixtures were defined by mixture design of experiments and the leaching of As, Ba, Cd, Cr, Cu, Mo, Ni, Pb, and Zn was evaluated in pressed specimens fired simulating the three industrial ceramic processes. The results showed that, despite the chemical, mineralogical and processing differences, only chrome and molybdenum were not fully immobilized during ceramic processing. Their leaching was modeled as polynomial equations, functions of the raw materials contents, and plotted as response surfaces. This brought to evidence that Cr and Mo leaching from the fired products is not only dependent on the corresponding contents and the basicity of the initial mixtures, but is also clearly related with the mineralogical composition of the fired products, namely the mount of the glassy phase, which depends on both the major oxides contents and the firing temperature.

 Autoría: Coronado M., Segadães A., Andrés A.,

 Fuente: Journal of Hazardous Materials, 2015, 299, 529-539

Editorial: Elsevier

 Fecha de publicación: 01/07/2015

Nº de páginas: 11

Tipo de publicación: Artículo de Revista

 DOI: 10.1016/j.jhazmat.2015.07.010

ISSN: 0304-3894,1873-3336

Proyecto español: CTM2009-11303

Url de la publicación: https://doi.org/10.1016/j.jhazmat.2015.07.010