Buscar

Estamos realizando la búsqueda. Por favor, espere...

 Detalle_Publicacion

Siderurgical aggregate cement-treated bases and concrete using foundry sand

Abstract: Cement-treated bases are soils, gravels or manufactured aggregates mixed with certain quantities of cement and water in order to improve the characteristics of a base or sub-base layer. Due to the exploitation of natural aggregates, it is a matter of importance to avoid shortage of natural resources, which is why the use of recycled aggregates is a practical solution. In this paper we studied the feasibility of the use of untreated electric arc furnace slags and foundry sand in the development of cement-treated bases and slag aggregate concrete with a lower quantity of cement. We analyzed the physical, mechanical and durability characteristics of the aggregates, followed by the design of mixes to fabricate test specimens. With cement-treated bases, results showed an optimal moisture content of 5% and a dry density of 2.47 g/cm3. Cement-treated bases made with untreated slag aggregate, foundry sand and 4% of cement content showed an unconfined compression strength at seven days of 3.73 MPa. For siderurgical aggregate concrete mixes, compressive strength, modulus of elasticity and flexural strength tests were made. The results showed that the mixes had good mechanical properties but durability properties could be an issue.

Otras publicaciones de la misma revista o congreso con autores/as de la Universidad de Cantabria

 Fuente: Applied Sciences 2021, 11, 1, 435

Editorial: MDPI

 Año de publicación: 2021

Nº de páginas: 13

Tipo de publicación: Artículo de Revista

 DOI: 10.3390/app11010435

ISSN: 2076-3417

Url de la publicación: https://doi.org/10.3390/app11010435

Autores/as

GILBERTO DE JESUS GARCIA DEL ANGEL

ALI AGHAJANIAN SABBAGH