Buscar

 Detalle_Publicacion

Quantification of Kraft paper ageing in mineral oil impregnated insulation systems through mechanical characterization


Abstract: Power transformers use Kraft paper, thermally upgraded Kraft and other polymeric papers (ex. Nomex) as the main solid insulation between the winding conductors. Dielectric oil used in transformers as an insulating and cooling fluid typically has an operating temperature range of 60-90 °C. These service temperatures can cause slow degradation of both the oil and the insulating paper winding, with a loss of mechanical and dielectric properties. In this sense, this work analyzes paper degradation through Young's Modulus, yield stress, rupture strength and strain under ultimate strength. An accelerated thermal ageing of the paper in mineral oil was carried out at temperatures of 110, 130 and 150 °C over different periods of time, in order to obtain information on the kinetics of the ageing degradation of the paper. The evolution of the mechanical properties and micro mechanisms of paper failure are analysed as a function of temperature and ageing time. Finally, the results obtained are compared with the traditional method of degradation analysis, based on the degree of polymerisation measurement.



Otras publicaciones de la misma revista o congreso con autores/as de la Universidad de Cantabria

 Autoría: Carrascal I., Fernández-Diego C., Casado J., Diego S., Fernández I., Ortiz A.,

 Fuente: Cellulose, 2018, 25(6), 3583-3594

Editorial: Springer Nature

 Fecha de publicación: 01/06/2018

Nº de páginas: 22

Tipo de publicación: Artículo de Revista

DOI: 10.1007/s10570-018-1788-1

ISSN: 0969-0239

Proyecto español: DPI2013-43897-P

Url de la publicación: https://doi.org/10.1007/s10570-018-1788-1