Frictional power losses on spur gears with tip reliefs. The friction coefficient role

Abstract: In this proposal, the effect of the friction coefficient on the efficiency of spur gears with tip reliefs was analysed. For this purpose, the efficiency values using an average friction coefficient along the mesh cycle were compared with those obtained implementing an enhanced friction coefficient formulation, which is based on elastohydrodynamic lubrication fundamentals. In this manner, it can be established the differences between both formulations in the efficiency and friction coefficient values, as well as the advantages of using this enhanced friction coefficient with respect to formulations implemented in traditional approaches of efficiency calculation. In addition to studying the impact of the friction coefficient choice on efficiency, the profile modifications influence on the friction coefficient and efficiency was also assessed. In this regard, three tip relief case studies were set out; pinion tip reliefs, driven wheel tip reliefs and profile modifications in both gears. From the results, it was inferred that the choice of friction coefficient formulation clearly influences the efficiency in gear transmissions with tip reliefs, obtaining discrepancies between both formulations with regard to which tip relief case study provides the lowest efficiency values.

 Autoría: Diez-Ibarbia A., Fernandez-del-Rincon A., de-Juan A., Iglesias M., Garcia P., Viadero F.,

 Fuente: Mechanism and Machine Theory, 2018, 121, 15-27

Editorial: Elsevier

 Fecha de publicación: 01/03/2018

Nº de páginas: 23

Tipo de publicación: Artículo de Revista

DOI: 10.1016/j.mechmachtheory.2017.10.003

ISSN: 0094-114X,1873-3999

Proyecto español: DPI 2013-44860

Url de la publicación: https://doi.org/10.1016/j.mechmachtheory.2017.10.003