Buscar

 Detalle_Publicacion

Micro-drilled optical fiber for enhanced laser strain sensors

Abstract: In this work, we present an experimental measurement of temperature and strain sensitivities of a micro-drilled optical fiber (MDOF). The MDOF consisted of a quasi-randomly distributed reflector along a single mode fiber (SMF). A fiber cavity laser based on MDOF was experimentally studied, attaining a single-wavelength laser emission centered at 1568.6nm. The output power level obtained from this single-laser oscillation when pumped at 140mW was around - 9.6dBm, and an optical signal to noise ratio (OSNR) of around 45dB was measured. Although temperature sensitivities of fiber Bragg gratings used as sensors are similar to our MDOF, strain sensitivity is enhanced around one order of magnitude when the MDOF was used.

Otras comunicaciones del congreso o articulos relacionados con autores/as de la Universidad de Cantabria

 Autoría: Pérez Herrera R., Bravo Acha M., Roldan-Varona P., Leandro D., Rodriguez Cobo L., Lopez-Higuera J., Lopez-Amo M.,

 Congreso: European Workshop on Optical Fibre Sensors (7º : 2019, Limassol, Chipre)

Editorial: SPIE Society of Photo-Optical Instrumentation Engineers

 Fecha de publicación: 28/08/2019

Nº de páginas: 4

Tipo de publicación: Comunicación a Congreso

DOI: 10.1117/12.2539802

ISSN: 0277-786X,1996-756X

Proyecto español: TEC2016-76021-C2

Url de la publicación: https://doi.org/10.1117/12.2539802

Autores/as

ROSA ANA PEREZ HERRERA

BRAVO ACHA, MIKEL

LEANDRO GONZÁLEZ, DANIEL

LUIS RODRIGUEZ COBO

MANUEL LOPEZ-AMO SAINZ