Buscar

Estamos realizando la búsqueda. Por favor, espere...

 Detalle_Publicacion

Nonlinear explicit analysis and study of the behaviour of a new ring-type brake energy dissipator by FEM and experimental comparison

Abstract: The aim of this paper is to comprehensively analyse the performance of a new ring-type brake energy dissipator through the finite element method (FEM) (formulation and finite element approximation of contact in onlinear mechanics) and experimental comparison. This new structural device is used as a system component in rockfall barriers and fences and it is composed of steel bearing ropes, bent pipes and aluminium compression sleeves. The bearing ropes are guided through pipes bent into double-loops and held by compression sleeves. These elements work as brake rings. In important events the brake rings contract and so dissipate residual energy out of the ring net, without damaging the ropes. The rope?s breaking load is not diminished by activation of the brake. The full understanding of this problem implies the simultaneous study of three nonlinearities: material nonlinearity (plastic behaviour) and failure criteria, large displacements (geometric nonlinearity) and friction-contact phenomena among brake ring components. The explicit dynamic analysis procedure is carried out by means of the implementation of an explicit integration rule together with the use of diagonal element mass matrices. The equations of motion for the brake ring are integrated using the explicit central difference integration rule. The presence of the contact phenomenon implies the existence of inequality constraints. The conditions for normal contact are and , where is the normal traction component and g is the gap function for the contact surface pair. To include frictional conditions, let us assume that Coulomb?s law of friction holds pointwise on the different contact surfaces, being the dynamic coefficient of friction. Next, we define the non-dimensional variable by means of the expression , where is the frictional resistance and t is the tangential traction component. In order to find the best brake performance, different dynamic friction coefficients corresponding to the pressures of the compression sleeves have been adopted and simulated numerically by FEM and then we have compared them with the results from full-scale experimental tests. Finally, the most important conclusions of this study are given.

 Fuente: Applied Mathematics and Computation 2010, 216(5),1571-1582

 Fecha de publicación: 01/05/2010

Nº de páginas: 25

Tipo de publicación: Artículo de Revista

 DOI: 10.1016/j.amc.2010.03.009

ISSN: 0096-3003,1873-5649

Url de la publicación: http://dx.doi.org/10.1016/j.amc.2010.03.009

Autores/as

COZ DÍAZ, JUAN JOSÉ DEL

GARCÍA NIETO, PAULINO JOSÉ