Estamos realizando la búsqueda. Por favor, espere...
Abstract: In this work, an optimization proposal for a model based on the definition of regions for crack propagation by means of the micromechanical comparison by SEM images and its application to failure assessment diagrams (FADs) is presented. It consists in three approaches. (1) The definition of the crack propagation initiation in the elastic‐plastic range. (2) A slight modification of the zones in which the FAD is divided for hydrogen induced cracking (HIC) conditions. (3) The introduction of a simple correction for the definition of the Kr coordinate of the FAD to take into account the fracture toughness reduction caused by an aggressive environment, instead of using a fracture parameter obtained from a test in air. For the experimental work, four medium and high strength steels exposed to a cathodic charge and cathodic protection environments were employed, studying two different loading rates in each case, and testing C(T) samples under slow rates in the environment. The study was completed with a subsequent fractographic analysis by SEM. A good degree of fulfilment was appreciated in both materials and environmental conditions, showing the validity of the predictions supplied by the FAD optimization model proposal, which constitutes an advance in the accuracy of the FAD predictive model.
Fuente: Metals 2019, 9, 670
Editorial: MDPI AG
Año de publicación: 2019
Nº de páginas: 17
Tipo de publicación: Artículo de Revista
Proyecto español: MAT2014-58738-C3-3-R
Consultar en UCrea Leer publicación
BORJA ARROYO MARTINEZ
JOSE ALBERTO ALVAREZ LASO
FEDERICO GUTIERREZ-SOLANA SALCEDO
ALBERTO CAYON MARTINEZ
YAHOSKA JULIETTEH JIRON MARTINEZ
ANA RUTH SECO APARICIO