Información de la publicación

Portal del Investigador > Publicaciones > detalle publicacion

Detalle_Publicacion

Environmental impact assessment of the hot-dip galvanising process

Otras comunicaciones del congreso o articulos relacionados con autores/as de la Universidad de Cantabria

Evaluating the performance of ionic liquids to separate refrigerant gases using the soft-SAFT EoS - Comunicación a Congreso
Exploring the suitability of using composite polymer ionic liquid membranes (CPILMs) in the recovery of low GWP refrigerant gases - Comunicación a Congreso
Continuous photo-electrochemical reduction of CO2 in a TiO2 photoanode-driven system - Comunicación a Congreso
CO2 Capture with room temperature ionic liquids coupled with membrane - Comunicación a Congreso
A protocol to assess the bioaccessibility of particulate matter-bound metals - Comunicación a Congreso
Particle size distribution of metals near a ferromanganese plant in relation with sources and control technologies of emitted particles - Comunicación a Congreso
Starting the chemical engineering education since the primary schools: project "La Universidad en tu Barrio" - Comunicación a Congreso
Innovation on chemical engineering education in Spain: the role of the Conference of Directors and Deans of Chemical Engineering (CODDIQ) - Comunicación a Congreso
The eco-learning experience: life cycle assessment of digitizing university classes - Comunicación a Congreso
On the use of chelating resins to recover transitions metals from spent sulphuric acid solutions - Comunicación a Congreso
Design of an experimental CO2 regeneration system in non-dispersive absorption processes using ionic liquid - Comunicación a Congreso
Optimized design of novel magnetophoretic-microfluidic devices for biofluids detoxification - Comunicación a Congreso
Nanofiltration contribution to the purification of lactic acid obtained biotechnologically - Comunicación a Congreso
Micro-separators design for lipopolysaccharides selective sequestration - Comunicación a Congreso
Particle size distribution of metals near a ferromanganese plant in relation with sources and control technologies of emitted particles - Comunicación a Congreso
Optimum performance of Salinity Gradient Power generation through RED technology - Comunicación a Congreso
Formation of chlorinated organic compounds during triclosan electrochemical oxidation: Determination of PCDD/Fs - Comunicación a Congreso
Economics of enhancing nutrient circularity in an organic waste valorization system - Comunicación a Congreso
A techno-economic assessment of the formic acid production by electrochemical reduction of CO2 - Comunicación a Congreso
Feasibility study of an innovation project in circular economy: Valorization of municipal solid waste incineration fly ashes by carbonation - Comunicación a Congreso
Effect of water and contaminants in the CO2/CH4 separation of hydrophobic and hydrophilic composite membranes - Comunicación a Congreso
Mixed matrix membrane coated electrodes for CO2 electroreduction in alkaline media - Comunicación a Congreso
New membranes for Butanol recovery from ABE mixtures by pervaporation - Comunicación a Congreso
Evaluating the potential of natural and waste brines as draw solutions in forward osmosis applications - Comunicación a Congreso
Analysis of PVDF/NMP/water ternary phase diagrams to predict membrane morphology by phase inversion - Comunicación a Congreso
A novel corrected function unit to compare LCA of diets - Comunicación a Congreso
Catalytic reduction of nitrates in a hollow fibers membrane reactor - Comunicación a Congreso
CO2 utilization: improving a continuous CO2 electroreduction process to formate using Bi-based electrocatalysts - Comunicación a Congreso
Composite Nafion membranes with supported reduced graphene oxide rGO/TiO2 photocatalysts - Comunicación a Congreso
Eco-innovation and circular economy strategies for the sustainability of the seafood sector under a NEXUS Water-Energy-Food framework - Comunicación a Congreso
Environmental efficiency of the Spanish food packaging waste management system - Comunicación a Congreso
Environmental sustainability assessment of seawater reverse osmosis brine valorization by means of electrodialysis with bipolar membranes - Comunicación a Congreso
High-purity hydrogen production by PSA technology from ammonia purge gas - Comunicación a Congreso
Integration of SGE-RED in a SWRO plant: an evaluation of the potential environmental benefits using LCA - Comunicación a Congreso
Minimization of electrooxidation total costs through its integration with membrane pre-concentration. Perfluorohexanoic acid removal as a case study - Comunicación a Congreso
New modified Nafion-biphosphonic acid composite membranes for enhanced proton conductivity and PEMFC performance - Comunicación a Congreso
Specific CO2 emissions of Coke Oven Gas applied in internal combustion engines - Comunicación a Congreso
Towards eco-innovation in the beverage industry: the case study of spirit drinks sector in Cantabria (Spain) - Comunicación a Congreso
Traceability of THMs formation in the electrochemically assisted regeneration of aquaculture waters - Comunicación a Congreso
Transitioning to a decarbonized chemical industry: an opportunity for the CO2 circular economy through the emerging use of hydrogen fuel cells - Comunicación a Congreso
Learning-by-Doing: a successful innovative teaching experience at the University of Cantabria - Comunicación a Congreso
Concentration of 1,3-dimethyl-2-imidazolidinone in aqueous solutions by sweeping gas membrane distillation - Comunicación a Congreso

Congreso: 3rd ANQUE-ICCE International Congress of Chemical Engineering: book of abstracts, Santander June 19th-21st 2019

Editorial: ANQUE

Año de publicación: 2019

Página: 149

Tipo de publicación: Comunicación a Congreso

ISBN: 978-84-09-12430-5

Autoría

ANDREA ARGUILLARENA MAZA

MARIA MARGALLO BLANCO

ANA MARIA URTIAGA MENDIA

JOSE ANGEL IRABIEN GULIAS

Descargar referencia

Bib Ris

Volver

Researchers portal

Portal del personal investigador

Detalle_Publicacion

Environmental impact assessment of the hot-dip galvanising process

Autoría

Descargar referencia