Buscar

Estamos realizando la búsqueda. Por favor, espere...

Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites

Abstract: Rigid particles have been incorporated into laminated composites, especially to enhance their bending performance attributed to the stiffening of the matrix phase (i) and the increased interlaminar shear resistance (ii). In order to better evaluate the improvement mechanism provided by the particulate inclusions, this work investigates the incorporation of micro-sized silica on the top, bottom and both surfaces of glass fibre laminates, mitigating the interference of the interlocking effect. Three-point bending, and impact tests are performed to evaluate the hybrid glass fibre composites containing 5, 7.5 and 10 wt% of micro silica. In addition, the effect of the micro silica particles into epoxy polymers is verified under tensile, compressive and abrasion tests. A finite element model is developed to simulate the three-point bending test and to better assess the behaviour of the composite laminate. Although silica particles lead to increased compressive modulus of the epoxy polymers, their positive effect on glass fibre composites under flexural loads is more evident when placed on the bottom side of the laminates subjected to the maximum tensile stress. The incorporation of 7.5 wt% silica microparticles at the bottom surface of the laminates achieves higher flexural strength and lower impact resistance.

 Fuente: Materials Research vol.22 no.4 e20190084

 Editorial: Universidade Federal de Sao Carlos

 Año de publicación: 2019

 Nº de páginas: 9

 Tipo de publicación: Artículo de Revista

 DOI: 10.1590/1980-5373-mr-2019-0084

 ISSN: 1516-1439,1980-5373

Autoría

RIBEIRO JUNIOR, ALUIZIO HELENO

GOMEZ, JUAN EDUARDO

DEVIN WAYNE, HALEB

TONATTO, M.L.P.

PANZERA, T.H.

SCARPA, F.