Información de la publicación

Portal del Investigador > en > Publications > publication-detail

Freeze–thaw durability of cement-based geothermal grouting materials

Other publications of the same journal or congress with authors from the University of Cantabria

Mechanical performance of sustainable asphalt mixtures manufactured with copper slag and high percentages of reclaimed asphalt pavement - Article
Induction healing of dense asphalt concrete - Article
Experimental evaluation of dense asphalt concrete properties for induction heating purposes - Article
Uniformity and mechanical properties of dense asphalt concrete with steel wool fibers - Article
The importance of sleepers spacing in railways - Article
Evaluation of the rejuvenation of asphalt by means of oil-saturated porous aggregates - Article
Experimental evaluation and recyclability potential of asphalt concrete mixtures with polyacrylonitrile fibers - Article
Critical assessment of new polymer-modified bitumen for porous asphalt mixtures - Article
Radiation shielding properties of siderurgical aggregate concrete - Article
Effect of high temperature and accelerated aging in high density micro-concrete - Article
Evaluation of reflective cracking in pavements using a new procedure that combine loads with different frequencies - Article
Aging of recycled aggregates mortars by drying-wetting cycles - Article
Transport mechanisms as indicators of the durability of precast recycled concrete - Article
Study of the expansive behavior of ladle furnace slag and its mixture with low quality natural soils - Article
Viscoelasticity modelling of asphalt mastics under permanent deformation through the use of fractional calculus - Article
Use of Hydrated Ladle Furnace Slag as a Filler Substitute in Asphalt Mastics: Rheological Analysis of Filler/Bitumen Interaction - Article
UV curing study of semi-dense asphalt mixes with different sizes of copper slag - A sustainable rehabilitation and production strategy - Article
Effect of siderurgical aggregates on concrete exposed to saline environments - Article
Fatigue limit of recycled aggregate concrete - Article
Structural recycled aggregate concrete made with precast wastes - Article
Evaluation of compactability and mechanical properties of bituminous mixes with warm additives - Article
Energy consumption during compaction with a Gyratory Intensive Compactor Tester. Estimation models - Article
Artificial reefs built by 3D printing: systematisation in the design, material selection and fabrication - Article
Feasibility of silicomanganese slag as cementitious material and as aggregate for concrete - Article
Self-compacting concrete containing coarse recycled precast-concrete aggregate and its durability in marine-environment-related tests - Article
Dynamic behaviour of high-speed rail fastenings in the presence of desert sand - Article
Assessment of the initial shear strength of brickwork facade – concrete - Article
In situ mechanical investigation of rammed earth: Calibration of minor destructive testing - Article
Prediction of slab track settlement using an innovative 3D train-track numerical tool: Full-Scale laboratory validation - Article
Influence of limestone filler on the rheological properties of bituminous mastics through susceptibility master curves - Article
An end-to-end computer vision system based on deep learning for pavement distress detection and quantification - Article
Impact of hydrocarbon exposure on the mechanical properties of rail pads - Article
Durability of recycled concrete made with recycled ceramic sanitary ware aggregate. Inter-indicator relationships - Article
Effect of copper slag addition on mechanical behaviour of asphalt mixes containing reclaimed asphalt pavement - Article
Development of an estimative model for the optimal tack coat dosage based on aggregate gradation of hot mix asphalt pavements - Article
Comparative analysis of the performance of asphalt concretes modified by dry way with polymeric waste - Article
Track transitions in railways: A review - Article
Numerical and experimental characterization of the mechanical behavior of a new recycled elastomer for vibration isolation in railway applications - Article
Exploratory study of porous asphalt mixtures with additions of reclaimed tetra pak material - Article
Development and experimental validation of a simplified Finite Element methodology to simulate the response of steel beams subjected to flame straightening - Article
Analysis of the influence of support positions in transition zones. A numerical analysis - Article
Analysis of the skid resistance and adherence between layers of asphalt concretes modified by dry way with polymeric waste - Article
Thermal suspectability analysis of the reuse of fly ash from cellulose industry as contribution filler in bituminous mixtures - Article
Reduction in the use of mineral aggregate by recycling cellulose ashes to decrease the aging of hot asphalt mixtures - Article
Porous asphalt mixture with alternative aggregates and crumb-rubber modified binder at reduced temperature - Article
Durability of geothermal grouting materials considering extreme loads - Article
Laboratory validation of the hole-drilling technique on the most common load-bearing walls used in heritage constructions - Article
The influence of recycled aggregates from precast elements on the mechanical properties of structural self-compacting concrete - Article
Experimental study of metal cushion pads for high speed railways - Article
Effect of ageing and RAP content on the induction healing properties of asphalt mixtures - Article
Polymer-cementitious composites containing recycled rubber particles - Article
Experimental analysis of enhanced cement-sand-based geothermal grouting materials - Article
Multiple recycled aggregate properties analysed by X-ray microtomography - Article
The use of copper slags as an aggregate replacement in asphalt mixes with RAP: Physical-chemical and mechanical behavioural analysis - Article
Analysis of environmental benefits associated with the incorporation of Waelz slag into fired bricks using LCA - Article
Influence of curing conditions on recycled aggregate concrete - Article
Assessment of historic brickwork under compression and comparison with available equations - Article
Stress corrosion cracking of new 2001 lean–duplex stainless steel reinforcements in chloride contained concrete pore solution: An electrochemical study - Article
Mechanical assessment of the induction heating as a method to accelerate the drying process of cold porous asphalt mixtures - Article
Drainage in railways - Article
Assessment of carbon black modified binder in a sustainable asphalt concrete mixture - Article
Combined US and UWB-RF imaging of concrete structures for identification and location of embedded materials - Article
Multiple-response optimization of open graded friction course reinforced with fibers through CRITIC-WASPAS based on Taguchi methodology - Article
Mechanical performance of fibers in hot mix asphalt: a review - Article
Optimizing the valorization of industrial by-products for the induction healing of asphalt mixtures - Article
Recyclability potential of asphalt mixes containing reclaimed asphalt pavement and industrial by-products - Article
Study of the mechanical behavior of asphalt mixtures using fractional rheology to model their viscoelasticity - Article
Effect of air voids content on asphalt self-healing via induction and infrared heating - Article
An experimental laboratory study of fiber-reinforced asphalt mortars with polyolefin-aramid and polyacrylonitrile fibers - Article
An integrated DoE - Stochastic multi criteria decision-making analysis applied for experimental evaluation of fiber reinforced porous asphalt mixtures - Article
Fluid transport within permeable pavement systems: A review of evaporation processes, moisture loss measurement and the current state of knowledge - Article
Laboratory assessment of porous asphalt mixtures reinforced with synthetic fibers - Article
Mechanical, environmental and economic feasibility of highly sustainable porous asphalt mixtures - Article
Experimental characterization and performance evaluation of geothermal grouting materials subjected to heating–cooling cycles - Article
Metal cushion dampers for railway applications: A review - Article
Influence of carbon fibre stiffness and adhesive ductility on CFRP-steel adhesive joints with short bond lengths - Article
Study of the permanent deformation of binders and asphalt mixtures using rheological models of fractional viscoelasticity - Article
Recycling of foundry by-products in the ceramic industry: green and core sand in clay bricks - Article
Evaluation of water effect on bituminous mastics with different contribution fillers and binders - Article
Influence of surface macro-texture and binder dosage on the adhesion between bituminous pavement layers - Article
Effect of warm additives on rutting and fatigue behaviour of asphalt mixtures - Article
New procedure to control the tack coat applied between bituminous pavement layers - Article
Test methods and influential factors for analysis of bonding between bituminous pavement layers - Article
Mechanical characterization of rubble stone masonry walls using non and minor destructive tests - Article
Gas permeability in concrete containing recycled ceramic sanitary ware aggregate - Article
Durability of recycled aggregate concrete - Article
The use of ladle furnace slag in soil stabilization - Article
Selection of fibers to improve porous asphalt mixtures using multi-criteria analysis - Article
Influence of early colour degradation of asphalt pavements on their thermal behaviour - Article
Optimisation of 3D printed concrete for artificial reefs: Biofouling and mechanical analysis - Article

Authorship: Borinaga-Treviño R., Pascual-Muñoz P., Calzada-Pérez M.A., Castro-Fresno D.,

Fuente: Construction and Building Materials 55 (2014) 390–397

Publisher: Elsevier Ltd

Publication date: 01/03/2014

No. of pages: 8

Publication type: Article

DOI: 10.1016/j.conbuildmat.2014.01.051

ISSN: 0950-0618,1879-0526

Spanish project: BIA2009-08272 ; FICYT FC-10-EQUIP10-17 ; BIA-2008-00058

Publication Url: http://dx.doi.org/10.1016/j.conbuildmat.2014.01.051

Citations in Scopus

Citations in Google Scholar

Other metrics in Scopus

Consult in UCrea Read publication

Authorship

ROQUE BORINAGA TREVIÑO

PABLO PASCUAL MUÑOZ

MIGUEL ANGEL CALZADA PEREZ

DANIEL CASTRO FRESNO

Download reference

Bib Ris

Back

Researchers portal

Portal del personal investigador

Freeze–thaw durability of cement-based geothermal grouting materials

Authorship

Download reference